Designed & Made in Taiwan
Carbon Lite Entry-Level | FPV Drone Parts and Small Test Coupons
Specifications
Working area360*300*80 mm (X*Y*Z)14.2 × 11.8 × 3.1 in
Machining accuracy+/- 0.05mmResults may vary with ambient conditions and material shrinkage
Feed ratemax. 2500 mm/min
Spindle motorBLDC brushless DC motor, 200WVariable speed: max. 20,000 rpm
ColletER11
End mill shank diameter4 mm; 6 mm
InterfaceUSB 2.0
Carbon fiber dust protectionStandard
Drone parts it fits
A complete 5-inch FPV frame set (193×144 mm bottom plate, top plate, four arms, side plates) fits within the 360×300 mm travel and can be cut in a single setup. Tube clamps, antenna mounts, ESC spacers and ASTM test coupons (up to 250×36 mm) also fit.
Accessories & software (optional)
Dust collection module | Laser engraving module | Software (2D drawing editor, 2D and 3D toolpath generator)